Product Description
SMSLES2X13YW Leslie Sms Bullet Flood 2X13W LED 120V 3000K 80 CRI White is a dual-head, motion-sensor flood from RAB Lighting that replaces two 75W halogen wide floods while using just 21.8W input. With 2,546 lumens at warm 3000K and an integrated 180° sensor, it delivers smooth, even illumination and hands-free security for entries, garages, and pathways.
Model: SMSLES2X13YW
Type: Dual-head LED bullet flood with integrated motion sensor
Lumens: 2,546 lm
Wattage: 2 × 13W LED (Input Watts 21.8W)
Color Temperature: 3000K (Warm)
CRI: 83 (80+)
Voltage: 120V, 60 Hz
Beam: NEMA 6H × 6V
Sensor: 180° detection up to 30 ft; time 5 sec–15 min; day/night photocell
Listings: UL Listed Wet Location; DLC 5.1 (Code: P1LUYKII)
Finish / Weight: White; 3.1 lbs
Warranty: 5-Year Limited
Free shipping on orders over $250
Product Benefits
- Save energy—replaces two 75W halogen BR30 floods with only 21.8W input.
- Hands-free security via integrated 180° motion sensor with adjustable time and daylight settings.
- Smooth, even light from diffused glass lenses and 6H×6V beam distribution.
- All-weather build—die-cast aluminum housing, silicone gaskets, and UL Wet Location rating.
Key Features
- Dual 13W heads delivering 2,546 lm at 3000K, 80+ CRI.
- Photocell & manual override: night-only or 24-hour operation plus double-flip switch override.
- Surge protection: withstands up to 3kV; robust, RF-immune electronics.
- EZ Hang installation: pre-assembled plate and hook for quick mounting to common boxes.
- RoHS components—mercury & UV free; Buy American Act compliance available on request.
Specifications
| Technical Specs | |
|---|---|
| LED Watts | 26W total (2 × 13W) |
| Input Watts | 21.8W |
| Voltage | 120V, 60 Hz |
| Driver | Constant current |
| Power Factor | 99% @ 120V |
| THD | 10.9% @ 120V |
| Sensor Power (idle) | 1W |
| Surge Protection | 3kV |
| Performance Specs | |
|---|---|
| Lumen Output | 2,546 lm |
| Efficacy | 116.8 lm/W |
| Color Temperature | 3000K |
| CRI | 83 (80+) |
| L70 Lifespan | 60,000 hours |
| NEMA Distribution | 6H × 6V |
| Physical Specs | |
|---|---|
| Housing | Precision die-cast aluminum |
| Lens | Diffused glass (smooth, even distribution) |
| Reflector | Vacuum-metalized polycarbonate |
| Mounting | EZ Hang hook; compatible with round/rectangular surface and recessed boxes |
| Gaskets | High-temperature silicone |
| Cold Start | −40°C (−40°F) |
| Max Ambient | 40°C (104°F) |
| Finish / Weight | White; 3.1 lbs |
| Compliance & Safety | |
|---|---|
| Listings | UL Listed for Wet Locations; suitable within 4 ft of ground |
| DLC | DLC 5.1 Qualified (P1LUYKII) |
| Environmental | RoHS components; mercury & UV free |
| Warranty | 5-Year Limited |
Application Examples
- Home or small-business entries, garages, side yards
- Walkways, patios, and perimeter lighting
- Back-of-house doors and service areas
- Small site signage and general area accents
Installation Tips
- Power off at the breaker before wiring; mount sensor 6'–10' high for best coverage.
- Use the included EZ Hang hook to support the plate while wiring; apply weatherproof silicone around the junction box for a proper seal.
- Connect black to line (hot), white to neutral, and ground to ground; the red pigtail is only for switching additional fixtures.
- Adjust Time (5 sec–15 min), Sensitivity, and Photocell (night-only or 24-hour) on the control panel, then walk-test the 180°/30 ft detection zone.
- Manual override: flip the wall switch twice within 5 seconds to hold lights on; resets to auto at dawn.
Frequently Asked Questions
Q: How bright is this fixture?
A: It delivers 2,546 lumens from two 13W heads with 80+ CRI at 3000K.
Q: What is the motion detection range?
A: The integrated sensor provides a 180° pattern up to approximately 30 feet, adjustable for time, sensitivity, and daylight operation.
Q: Can it run during the day?
A: Yes—turn the photocell knob toward the sun icon for 24-hour operation, or toward the moon for night-only.
Q: Is there a manual override?
A: Yes. Double-flip the wall switch within five seconds to keep lights on; the unit returns to auto at dawn.
Q: What load can the sensor switch?
A: Up to 500W LED at 120V; for higher loads, use an external relay.
Q: Is it rebate-eligible?
A: It’s listed on the DLC 5.1 Qualified Products List (code P1LUYKII), which may qualify for local utility rebates.
Q: How does it handle weather?
A: It’s UL Listed for wet locations, starts at −40°C, and is suitable up to 40°C ambient.
