Product Description
NLIC-402AT/1EL 4" Shallow IC AT Low Voltage Housing 120V/12V Elect. Transformer is a recessed housing. Electrical: 120V or 277V (must specify) input; MLV (with Magnetic Transformer) or ELV (with dimming. Specs verified from the NORA Lighting specification sheet.
Key Specs
- Type: recessed housing
Why Buy Here?
- Free shipping on orders over $250
- Fast handling & commercial invoicing
- Expert support for spec substitutions
Product Benefits
- 4” Shallow low voltage IC small low profile double wall housing provides crisp, defined MR16 quartz halogen illumination to any insulated ceiling application.
- Air-Tight construction offers energy savings by reducing the flow of air through the ceiling.
- The small profile of this series provides easy installation to any joist or steel stud construction.
- A wide variety of attractive adjustable trims allows fine-tuned aiming of direction light sources.
Key Features
- Plaster Frame: 0.040 steel frame with integral bar hanger brackets. Brackets can accommodate longer 27" accessory flat bar hangers. Shipping screw installed to provide extra security for transformer during shipment - remove before installation.
- Housing: 0.035 white baked enamel one-piece drawn steel. Outside box constructed of formed aluminum. Adjustable for ceiling thickness up to ⁷/8”.
- Air Flow Restriction: Housing has factory installed gaskets to restrict airflow from room into ceiling plenum to <2CFM (cubic feet per minute) in accordance with ASTM-283 Air-Tight requirements.
- Clearance: “IC” Insulated ceiling housings are direct contact rated. Not to be used in direct contact with spray foam insulation.
- Bar Hangers: Two 13-³/4” to 24-¹/2” adjustable bar hangers with captive nails are included on frame. Bar hangers are parallel to junction box, but can be repositioned 90° perpendicular to junction box if desired. “L” Shaped bar hanger foot to align to bottom of construction joist. A T-Bar notch allow for easy installation in a suspended ceiling.
- Junction Box: Prewired 25 cubic inch 0.064" thick galvanized steel, with seven ¹/2" knockouts and four Romex pryouts and snap on covers. All leads are #18AWG wire, the ground wire is connected to the bottom, and quick connectors are supplied on all leads. Maximum of 8 no. 12 AWG through branch circuit conductors suitable for at least 90°C permitted in junction box.
Specifications
Performance Specifications
| Dimming | MLV (with Magnetic Transformer) or ELV (with |
Electrical Specifications
| Input Voltage | 120V or 277V (must specify) |
Applications
- recessed housing
Frequently Asked Questions
What input voltage does it require?
120V or 277V (must specify).
Is it dimmable?
Yes — MLV (with Magnetic Transformer) or ELV (with.