Product Description
ND4R12D Recessed Downlights Rough-In 4 Inches Round 12w 0-10v Dim Elv is a 4-inch round rough-in housing for recessed LED downlights, rated for a 12W module with 0-10V and ELV dimming. The universal-voltage driver operates at 120-277V, 50/60 Hz, and the housing is suitable for wet locations from 0°C to 40°C. Specs verified from the RAB installation documentation.
Key Specs
- Type: Recessed downlight rough-in housing
- Size: 4" round
- Wattage: 12W
- Dimming: 0-10V / ELV
Why Buy Here?
- Free shipping on orders over $250
- Fast handling & commercial invoicing
- Expert support for spec substitutions
Product Benefits
- Universal 120-277V driver for flexible line-voltage wiring.
- Wet-location rated from 0°C to 40°C ambient.
- Adjustable nailer bars (13" to 24") suit wood-joist installs.
- Butterfly brackets with wing-nut height adjustment up to a 1" ceiling.
Key Features
- 4" round rough-in for recessed LED downlight modules.
- 0-10V, ELV, and Triac dimming, plus non-dimming wiring.
- For non-insulated ceilings only — non-accessible and accessible.
- Integrated junction box with knockout and snap clip.
- 5" cut-out diameter for the trim module.
Specifications
Electrical Specifications
| Input Voltage | 120-277V, 50/60 Hz (universal) |
| Wattage | 12W |
| Dimming | 0-10V / ELV / Triac / non-dimming |
Physical Specifications
| Size | 4" round |
| Cut-Out | 5" diameter |
| Mounting | Nailer bars (13"–24") + butterfly brackets |
| Ceiling Thickness | up to 1" |
Compliance & Safety
| Environment | Wet locations, 0°C to 40°C |
| Insulation | Non-insulated ceilings only |
Applications
- New-construction recessed downlighting
- Wet-location ceiling lighting
- Commercial and residential remodel ceilings
Installation Tips
- Insert nailer bars through the butterfly-bracket slots and secure to the joists.
- Adjust butterfly brackets via the wing nuts until the rough-in is flush with the finished ceiling.
- Connect the black lead to LINE, white to COMMON, and ground to supply ground.
Frequently Asked Questions
What driver voltage does it use?
A universal-voltage driver operating at 120-277V, 50 or 60 Hz.
Can it be installed in insulated ceilings?
No — it is rated for non-insulated ceilings only.
How do I adjust the height?
Loosen the wing nuts and slide the butterfly brackets to the required ceiling depth (up to 1").