Product Description
Nora NATLED-5040HW 24V 40W Constant Voltage Dimmable Hardwire Electronic Driver is an enclosed Class 2 power supply with a built-in conduit-access wiring compartment and smooth Triac or ELV dimming for Nora 24V systems. The driver includes a 10' power line connector for fast installs.
Quick Specs
- Input: 120V AC
- Output: 24V DC constant voltage
- Power: 40W (recommended load ≤ 80% ≈ 32W)
- Dimming: Triac or ELV
- Protection: Short-circuit, over-voltage & over-temperature
- Includes: 10' power line connector (NALTL-10)
- Class: Meets Class II output limits
- Listings: cULus Listed enclosure & driver; FCC compliant
- Dimensions: 9-1/2" L × 2-1/8" W × 1-1/2" H
Free shipping on orders over $250
System Compatibility
- 24V Nora systems: NMP2-A / NMP2-LED, NUTP1/3/5/7/8/9/10/11, NUTP51/71/81, NULB Silk SBC, and more
- Optional accessories: NALTL-30 (30' connector), NATL-302W (splitter)
Benefits
- Smoother dimming with widely available Triac or ELV wall dimmers.
- Safer Class 2 output for simplified low-voltage wiring and inspections.
- Fast installation thanks to the included 10' power line connector.
- Reliable operation with built-in short-circuit, over-voltage and thermal protection.
Key Features
- Constant voltage 24V DC for tape lights, light bars, and 24V Nora modules.
- Hardwire enclosure with conduit-access wiring compartment.
- Triac or ELV dimmable to suit existing control infrastructure.
- cULus Listed enclosure and driver; FCC compliant.
- Recommended 80% loading guideline for best performance.
Specifications
Technical Specs
| Input Voltage | 120V AC, 60Hz |
| Output Voltage | 24V DC (constant voltage) |
| Output Power | 40W max (load up to ~32W recommended) |
| Dimming | Triac or ELV |
| Protections | Short-circuit, over-voltage, over-temperature |
| Class | Meets Class II output limits |
| Compliance | cULus Listed; FCC compliant |
Physical Specs
| Enclosure | Metal, enclosed; conduit-access wiring compartment |
| Dimensions | 9-1/2" L × 2-1/8" W × 1-1/2" H |
| Included Cable | 10' power line connector (NALTL-10) |
System Compatibility & Accessories
| Compatible Systems | Nora 24V series: NMP2-A, NMP2-LED, NUTP1/3/5/7/8/9/10/11, NUTP51/71/81, NULB |
| Optional Accessories | NALTL-30 (30' connector), NATL-302W splitter (white) |
Application Examples
- Under-cabinet and cove lighting with 24V tape light
- Display cases, shelving and millwork illumination
- Accent lighting with Nora 24V bars and modules
- Continuous runs using Nora “Continuous” tape families
Installation Tips
- Size the driver so the connected load is at or below 80% of 40W (≤ ~32W).
- Use Triac or ELV wall dimmers; follow dimmer manufacturer low-end trim guidance.
- Mount the enclosed driver in a ventilated location; keep low-voltage wiring separate from line voltage.
- Observe polarity on 24V connections and verify compatibility with the intended Nora 24V system.
- Follow all local codes; cULus and FCC listings support inspection and EMI compliance.
Frequently Asked Questions
Is this a constant voltage or constant current driver?
Constant voltage, 24V DC.
Which dimmers can I use?
Standard Triac (forward phase) or ELV (reverse phase) wall dimmers.
How much load should I place on the driver?
For best performance, plan for up to about 32W (~80% of 40W).
What comes in the box?
A 10' power line connector (NALTL-10) is included.
Is it listed for safety and EMC?
Yes—cULus Listed enclosure & driver and FCC compliant.
Which Nora products are compatible?
Nora 24V families such as NMP2-A / NMP2-LED modules, NUTP tape lights (Standard, Hy-Brite, RGB/RGBW, CCT), and NULB Silk SBC lightbars.
