Product Description
STL360HBW/L STL360HBW Sensor + PAR38 38W 3000K/4000K/5000K E26 90CRI 3600LM by RAB Lighting delivers advanced motion detection in a stylish white bell-hood design. Engineered for total perimeter security, this floodlight fixture offers selectable color temperatures and full 360° sensor coverage, perfect for residential or commercial outdoor spaces.
Brand: RAB Lighting
Model: STL360HBW/L
Finish: White (Bell Hood Design)
Color Temperature: 3000K / 4000K / 5000K (Selectable)
Lumen Output: 3600 lm
Wattage: 38W
Voltage: 120V AC 60Hz
CRI: 90
Wet Location Rated
Free shipping on orders over $250
Benefits
- Full coverage motion sensing detects activity 180° outward and 360° downward
- White bell hoods offer a clean, decorative finish for exterior installations
- Selectable color temperatures provide flexible lighting customization
- Tool-less installation with pre-wired EZ Plate system saves time on-site
Key Features
- Field-selectable PAR38 LEDs: 3000K, 4000K, 5000K included
- 360° sensor with adjustable range and zone masking
- Manual Override and Evening Timer Mode built-in
- RF-shielded circuitry to prevent false activations
- UL Listed for wet locations with 10-year fixture warranty
Specifications
Technical Specs
| Wattage | 38W |
| Voltage | 120V AC 60Hz |
| Color Temperature | 3000K / 4000K / 5000K |
| Lumen Output | 3600 lm |
| CRI | 90 |
| Rated Life | 15,000 hours |
| Switching Capacity | 120W Electronic Ballast (LED) @ 120V |
Physical Specs
| Finish | White |
| Weight | 4.5 lbs |
| Dimensions | 17.5" W x 7" H x 5.625" D |
| Housing | Die-cast aluminum with serrated locking swivel |
Performance Specs
| Sensor Coverage | 180° outward, 60 ft forward + 360° downward |
| Detection Range | Adjustable 100% to 30% |
| Time Delay | 5 seconds to 12 minutes |
| Sensor Modes | Auto / Test / Manual Override / Evening Timer |
Compliance & Safety
| UL Listed | Yes – for wet locations |
| Surge Protection | Withstands up to 6000V |
| Warranty | 10-Year Fixture / 3-Year Lamp Warranty |
Application Examples
- Residential backyards and garages
- Light commercial storefronts and parking areas
- School and campus building exteriors
- Perimeter walkways, alleys, and patios
Installation Tips
- Mount between 6–10 feet high for best detection coverage
- Use provided lens masks to prevent false triggers from trees or traffic
- Utilize Test Mode for walk testing and aiming adjustments
- Avoid placing near heat sources or reflective surfaces
Frequently Asked Questions
Is the STL360HBW/L suitable for 24/7 operation?
Yes, the photocell is adjustable for continuous day and night operation if needed.
What is the purpose of the bell hoods?
Bell hoods provide aesthetic shielding and directional light control, especially for residential use.
Can I manually turn the lights on without motion?
Yes, use Manual Override Mode via wall switch to keep lights on continuously until dawn.
How many hours can the Evening Timer keep the light on?
From 1 to 8 hours after dusk, then it reverts to motion activation.
Is installation difficult?
Not at all — it comes pre-wired with an EZ Plate for fast mounting to standard junction boxes.
Are the bulbs included?
Yes, two PAR38 LED lamps are included with selectable 3000K, 4000K, or 5000K color temps.
Does it detect pets or animals?
Yes, large animals can trigger the motion sensor. Adjust sensitivity or use the blinders to limit detection.
What causes false triggers?
Movement from wind-blown branches, heat from HVAC vents, or passing traffic. Proper placement and masking solve this.
What if the lights don’t turn off?
Check for active Manual Override or Evening Timer Mode and reset by cycling the power.
Does it support multiple sensors or fixtures?
Yes. You can wire multiple fixtures to one sensor or use multiple sensors — just avoid parallel wiring for reliability.
