Product Description
RAB SL500 Smart Lantern – Outdoor Motion Sensor (White) adds 180° motion-activated control to existing lantern fixtures, switching standard 120V loads with adjustable time delay, daylight sensing, and a sealed, vandal-resistant lens for reliable performance in wet locations.
Quick Specs
- Technology: Infrared motion detection, 180° by up to 30' coverage
- Voltage: 120V AC, 60 Hz
- Load (remote): up to 500W incandescent; LED/electronic ballast per driver limits
- Time Delay: Adjustable ~5 seconds to 15 minutes
- Daylight Control: Photoelectric (night-only or 24-hour)
- Manual Override: Double-flip wall switch; auto reset at dawn
- Surge Protection: up to 3000V
- Power Use: ~1W
- Listing: UL raintight; suitable for wet locations
- Finish: White
Free shipping on orders over $250
What’s Included
- Smart Lantern sensor with sealed, color-matched lens
- Clapboard & straight wall mounting plates + extender
- Crossbar, wire nuts, hardware, lens mask & adjustment tools
- Installation guide for wiring and aiming
Benefits
- Hands-free lighting & security—turns lights on with motion and off after the set delay.
- Energy savings using daylight sensing (night-only or 24-hour selectable).
- Reliable in harsh weather with sealed, molded lens and RF-shielded electronics.
- Fast commissioning via 5-second Quick Test and 3-minute auto test mode.
Key Features
- 180° detection with up to ~30' range; best performance when traffic crosses the pattern.
- Manual override by double-flipping the wall switch; resets automatically at dawn.
- Adjustable time, sensitivity, and photocell for site-specific tuning.
- Sealed, vandal-resistant lens (molded into the case) for a bug-proof, rain-tight design.
- LED “on-guard” indicator provides a visible deterrent day and night.
- Surge protection up to 3000V and high RF immunity for dependable operation.
Specifications
Technical Specs
| Input Voltage | 120V AC, 60 Hz |
| Sensing Pattern | 180° horizontal, up to ~30' detection; tilt-down aiming to reduce range |
| Time Delay | ~5 seconds to 15 minutes (adjustable) |
| Daylight Operation | Photoelectric control: night-only or 24-hour selectable |
| Manual Override | Double-flip wall switch; auto-reset at dawn |
| Power Consumption | Approximately 1W |
| Surge / RF | Up to 3000V surge protection; circuits fully RF-shielded |
| Listings | UL raintight photoelectric switch; wet location |
Electrical / Load Ratings
| Incandescent (remote) | Up to 500W @ 120V |
| LED / Electronic Ballast (remote) | Typical up to 450W (0.8 pf) or 300W (0.5 pf), per driver limits |
| Mounted to Sensor | Use lower ratings (e.g., up to ~250W incandescent) per manual guidance |
Physical Specs
| Construction | Molded case with sealed, vandal-resistant lens |
| Color | White (color-matched lens) |
| Mounting Height | Recommended 5–8' for optimum range |
| Included Hardware | Clapboard & straight plates, extender, crossbar, wire nuts, lens mask, tools |
Compliance & Safety
| Wet Location | Yes (raintight) |
| Installation | Follow NEC/local codes; keep sensor below/away from hot fixtures |
Application Examples
- Front porches, side entries, garages, and walkways
- Small commercial storefronts and service doors
- Perimeter and security lighting for residences
- Retrofits where lantern style must be preserved
Installation Tips
- Turn power OFF; mount 5–8' high so motion crosses the sensor pattern.
- Aim slightly downward to limit long-range detections; use lens masks to trim sides.
- Avoid circuits with motor loads (HVAC, appliances, garage doors) to prevent false trips.
- Keep the sensor below and away from hot lamps; seal around all openings for wet-location integrity.
- Use the 5-second Quick Test and 3-minute auto test to aim and verify coverage day or night.
Frequently Asked Questions
What coverage does the SL500 provide?
It detects motion across a wide 180° field with up to ~30 feet of range when properly aimed.
Can I keep the lights on continuously?
Yes. Use the manual override by quickly flipping the wall switch off/on twice; the unit resets to automatic at dawn.
Does it work during the day?
You can choose night-only operation or 24-hour operation with the photocell control.
How long will the lights stay on?
The time delay is adjustable from about 5 seconds to 15 minutes after motion stops.
Is it suitable for wet locations?
Yes. The sealed, molded lens and enclosure are rated raintight for outdoor use.
What loads can it switch?
Up to 500W incandescent on a remote circuit; LED/electronic ballast loads depend on driver power factor—plan conservatively per the manual.
Will passing cars trigger it?
Keep the sensor at least ~30' from roadways and aim away from traffic; use lens masks or tilt down to reduce nuisance activations.
What comes in the box?
Mounting plates (clapboard & straight), extender, crossbar, hardware, lens mask, and tools for aiming and adjustments.
