Product Description
RAB OCSKNOOKFAW Undercabinet Knook Occupancy Sensor – White adds hands-free control to KNOOK FA undercabinet runs using passive infrared (PIR) detection, adjustable time-delay settings, and a clean white finish designed for modern kitchens, offices, and retail millwork.
Quick Specs
- Technology: Passive Infrared (PIR)
- Input Voltage: 120V, 50/60Hz
- Time Delay: 30 sec, 10 min, 20 min, 30 min (dial adjustable)
- Coverage: ~10 ft diameter @ 8 ft mounting height
- Mounting Height: Optimal ~6 ft (reduced sensitivity ~8 ft)
- Use: Indoor dry location only
- Finish / Color: White
- Dimensions: 8" L × 3-5/8" W × 1-1/8" H
- Weight: 0.9 lb
- Warranty: 5 Years
Free shipping on orders over $250
Compliance & Notes
- TAA compliant designated-country end product
- BAA compliance available upon request
- For KNOOK FA undercabinet systems; jumper cable sold separately
- Do not install in small, enclosed spaces
Benefits
- Hands-free operation turns undercabinet lighting on with motion and off after the selected delay.
- Energy savings by preventing lights from being left on in unoccupied spaces.
- Simple field setup with a front-access time-delay dial (30 sec to 30 min).
- Clean, low-profile design matches KNOOK fixtures and blends with cabinetry.
Key Features
- Passive Infrared (PIR) sensing for reliable motion detection across zones.
- Adjustable time delay (30s / 10m / 20m / 30m) to fit usage patterns.
- 10 ft coverage at 8 ft mounting height; best performance around 6 ft.
- Indoor dry location rating with easy junction-box mounting.
- White finish formulated for long-lasting color; 0.9 lb weight.
- TAA compliant; BAA option available on request.
Specifications
Technical Specs
| Technology | PIR (Passive Infrared) motion sensing |
| Input Voltage | 120V AC, 50/60Hz |
| Time Delay Options | 30 seconds, 10 minutes, 20 minutes, 30 minutes |
| Operating Environment | Indoor, dry location |
Physical Specs
| Finish / Color | White |
| Dimensions | 8" L × 3-5/8" W × 1-1/8" H |
| Weight | 0.9 lb |
| Mounting | Junction box mounting to cabinet; connects to KNOOK FA fixtures (jumper cable sold separately) |
Performance & Coverage
| Coverage Diameter | ~10 ft at 8 ft mounting height |
| Recommended Height | Optimal ~6 ft; reduced sensitivity ~8 ft |
| Function | Auto-ON with motion; turns OFF after selected time delay |
| Warranty | 5 years (finish and electrical components) |
Compliance & Safety
| TAA | Designated-country end product |
| BAA | Available upon request |
| Safety Notes | Turn power OFF before installing; do not install in small enclosed spaces; use only in dry locations |
Application Examples
- Kitchen counters and breakroom cabinets
- Retail display shelves and service counters
- Office workstations and copy areas
- Residential task lighting and utility rooms
Installation Tips
- Confirm power is OFF and follow NEC/local codes.
- Use the supplied 3/8" wire connector; ensure the outer jacket extends through the fitting before tightening.
- Set the Time Delay using the accessible dial before closing the sensor cover.
- Observe dry location only and avoid tight, enclosed cavities that trap heat.
- Connect to KNOOK FA fixtures with the appropriate jumper cable (sold separately) and cap any unused ports.
Frequently Asked Questions
What does the OCSKNOOKFAW control?
It provides PIR occupancy sensing for KNOOK FA undercabinet lighting runs, turning lights on with motion and off after a set delay.
What time-delay settings are available?
You can choose 30 seconds, 10 minutes, 20 minutes, or 30 minutes using the front-access dial.
What coverage can I expect?
Approximately a 10-foot diameter at an 8-foot mounting height; best sensitivity is around 6 feet.
Can I use it in damp locations?
No. It is rated for indoor dry locations only.
Is special wiring required?
Standard 120V (50/60Hz) supply. Use the supplied 3/8" wire connector and follow the wiring diagram in the instructions.
Is it compliant for government projects?
Yes, it is TAA compliant, and BAA compliance may be available upon request.
