Product Description
NM2-2RG4027MPW 2" M2 Round LED Adjustable Gimbal delivers 400 lumens from a compact 6W, 2700K module with 90+ CRI for warm, high-fidelity illumination. This IC Air-Tight, no-housing-required gimbal installs fast in remodel or new construction and offers a clean matte powder white finish ideal for residential and light commercial spaces.
- Lumen Output: 400 lm
- Wattage: 6W
- CCT: 2700K (90+ CRI)
- Beam: 40° Flood
- Adjustability: 15° gimbal
- Voltage: 120V
- Dimming: Triac / ELV
- Rating: IC Air-Tight; cETLus Wet Location
- Lifespan: 60,000 hours (L70)
- Certifications: ENERGY STAR, Title 24 JA8-2022
- Finish: Matte Powder White (MPW)
- Free shipping on orders over $250
Product Benefits
- Warm, high-quality light: 2700K at 90+ CRI enhances finishes and skin tones.
- Fast, no-housing install: IC Air-Tight design with spring clips speeds remodels and new builds.
- Precise aiming: 15° adjustable gimbal puts light exactly where you need it.
- Energy smart: 6W LED delivers 400 lm with smooth Triac/ELV dimming.
Key Features
- IC Air-Tight rated; restricts airflow to <2 CFM to meet ASTM E283 requirements.
- Wet location listed (most models) for showers and covered outdoor ceilings.
- Driver/J-Box included with quick-disconnect for easy wiring and service.
- Optional square trim accessory for a modern, architectural look.
- Title 24 JA8-2022 and ENERGY STAR certified with a 5-year limited warranty.
Enhanced Specifications
Technical Specs
| Light Source | LED, 400 lm |
| Wattage | 6W |
| CCT / CRI | 2700K / 90+ |
| Beam Spread | 40° Flood |
| Lumen Maintenance | L70 @ 60,000 hours |
| Dimming | Triac or ELV (120V) |
Physical Specs
| Trim Type | 2" Round Adjustable Gimbal |
| Adjustability | 15° tilt |
| Finish | Matte Powder White (MPW) |
| Construction | Die-cast aluminum |
| Ceiling Cutout | 2-3/4" |
| Ceiling Thickness | Up to 3/4" |
Performance & Compliance
| Voltage | 120V |
| IC / Air-Tight | Yes (no housing required) |
| Wet Location | cETLus Listed |
| Energy Programs | ENERGY STAR; Title 24 JA8-2022 compliant |
| Warranty | 5-Year Limited |
Application Examples
- Residential kitchens, baths, showers, hallways, and living areas
- Hospitality guest rooms and corridors
- Retail accent lighting for merchandise and displays
- Covered outdoor ceilings and soffits
Installation Tips
- Turn off power at the breaker before installation.
- Use the included junction box with quick disconnect; connect to 120V supply.
- Secure the luminaire with the two spring clips; verify ceiling thickness (≤ 3/4").
- Aim the 15° gimbal toward artwork, niches, or task areas after energizing.
- For new construction, use the optional frame-in kits (NF-R246 or NFC-R275) to pre-locate cutouts.
Frequently Asked Questions
Q: Does this require a recessed can?
A: No. It is a can-less design with an included junction box, rated IC Air-Tight for direct contact with insulation.
Q: Is the NM2-2RG4027MPW wet-location rated?
A: Yes. It is cETLus Listed for wet locations, making it suitable for showers and similar areas.
Q: What dimmers are compatible?
A: The fixture supports Triac or ELV dimming on 120V circuits. Use quality, LED-rated dimmers for best results.
Q: Can I convert the round trim to a square look?
A: Yes. Add the NM2-2SGT square trim accessory (black or white) to change the appearance without replacing the luminaire.
Q: What is the beam angle?
A: 40° flood beam for balanced accent and general lighting.
Q: Is it Title 24 compliant?
A: Yes. It meets Title 24 JA8-2022 high-efficacy requirements and is ENERGY STAR certified.
Q: How far can I place the driver box from the luminaire?
A: Use NM2-EW extension cables (4' or 10'); maximum total length between luminaire and driver is 40'.
Q: What’s the warranty?
A: 5-year limited warranty from Nora Lighting.
