Product Description
NHIC-17QAT 6" Line Voltage IC AT New Construction Housing is designed for insulated ceilings and approved for direct contact with thermal insulation. Featuring an air-tight, IC-rated design, this housing provides energy efficiency, durable construction, and compatibility with Nora 6" line voltage trims and LED retrofit modules.
Voltage: 120V
Socket Type: Medium Base (E26)
Max Wattage: 90W (dependent on trim)
Ceiling Cutout: 6-3/8"
Application: Insulated ceilings (IC-rated)
Free shipping on orders over $250
- IC-rated and air-tight for use in direct contact with insulation
- Compatible with LED retrofits and all Nora 6" line voltage trims
- Quick connect wiring for simplified electrical setup
- Pre-installed gasket minimizes air leakage and meets ASTM-283 standards
- Housing Type: 6" IC Air-Tight for New Construction
- Socket: Medium base E26 with protective cap
- Voltage: 120V
- Ceiling Thickness Compatibility: 5/8" to 1-1/4"
- Air Flow Restriction: ≤2 CFM per ASTM-283
- Bar Hangers: Adjustable 13-3/4" to 24-1/2" with captive nails and alignment feet
- Junction Box: Prewired 25 cu. in. steel with knockouts and Romex® pryouts
- Thermal Protector: UL-rated for 90°C
| Technical Specifications | |
|---|---|
| Model | NHIC-17QAT |
| Voltage | 120V |
| Socket Type | Medium Base (E26) |
| Maximum Wattage | 90W (varies by trim) |
| Housing Material | 0.036" Galvanized Steel |
| Junction Box | 25 cu. in., galvanized steel with 7 knockouts |
| Mounting | Adjustable bar hangers with T-bar slot and L-shaped feet |
| Air Tight Rating | Factory gasketed to ≤2 CFM (ASTM-283) |
| Certifications | cULus Listed, ASTM-283, Washington State, NYC Approved |
- New construction residential ceilings requiring IC-rated housings
- Commercial spaces seeking airtight, code-compliant recessed lighting
- Retrofit LED upgrade compatibility with Nora 6" trims
- Mount housing using the included adjustable bar hangers aligned to joists
- Ensure the housing is not in direct contact with spray foam insulation
- Use quick connect wiring for faster setup
- Install trims with torsion spring or coil spring mounting (based on trim)
Q: Can this housing be used with LED retrofit modules?
A: Yes, it is fully compatible with all Nora 6" LED retrofit modules.
Q: Is this housing air-tight?
A: Yes, it features factory-installed gaskets and is tested to ASTM-283 standards (≤2 CFM).
Q: What ceiling thicknesses are supported?
A: The housing supports ceilings from 5/8" to 1-1/4" thick.
Q: Does this housing include bar hangers?
A: Yes, it includes 13-3/4" to 24-1/2" adjustable bar hangers with alignment feet and captive nails.
Q: What is the cutout size for this housing?
A: The ceiling cutout should be 6-3/8".
