Product Description
The NATL-SWEX60/24A from Nora Lighting’s Nexus Series is a smart, integrated solution combining a 24V dimmable driver and wall switch into a single compact unit. Designed to simplify low-voltage LED installations, this all-in-one dimmer + driver eliminates compatibility issues and offers smooth, flicker-free dimming from 100% to 5%. It fits in a standard in-wall electrical box and supports up to 60W of 24V lighting load.
Key Specifications:
- Input Voltage: 120VAC
- Output Voltage: 24VDC
- Max Load: 60W
- Dimming Range: 100% - 5%
- Power Factor: >0.9
- Efficiency: >91%
- Mounting: Fits standard wall switch box
- Certifications: cULus, FCC, RoHS, CE
Free shipping on orders over $250
Why Choose the NATL-SWEX60/24A?
- Combines dimmer and power supply into one unit, reducing installation time
- No compatibility concerns between LED drivers and dimmers
- Fits standard recessed wall boxes without derating when ganged
- Includes voltage barrier to support Class 1 and Class 2 wiring in the same box
Key Features
- All-in-One Design: LED driver and dimmer switch in a single device
- Smooth Dimming: Preset dimmer with on/off switch provides full-range dimming from 100% to 5%
- Voltage Compensation: Built-in dial adjusts output to compensate for voltage drop
- Power Failure Memory: Recalls last setting after power is restored
- Protections: Short circuit, overvoltage, and thermal protection built-in
Specifications
Electrical Specs
| Input Voltage | 120VAC, 50/60Hz |
| Output Voltage | 24VDC |
| Max Load | 60W |
| Power Factor | >0.9 |
| Efficiency | >91% |
| Stand-by Power | ≤0.5W |
Safety & Protection
| Protection Features | Short circuit, thermal runway, overvoltage |
| Inrush Current | Meets NEMA-410 requirements |
| Leakage Current | <500µA |
| Startup Regulation | Within +/- 3% |
Mechanical
| Installation | Standard recessed electrical wall box |
| Voltage Barrier | Included for Class 1 and 2 circuit separation |
| Dimming Control | Sliding lever with on/off switch |
Application Examples
- Under-cabinet lighting in kitchens and bathrooms
- Accent lighting for shelves and coves
- Retail and hospitality LED tape light installations
- Architectural lighting with COB or high-output tape
Installation Tips
- Use in standard electrical wall boxes—no special housings required
- Observe Class 1 and Class 2 separation using the included partition
- Adjust voltage dial for long LED runs to compensate for drop
- Ensure load does not exceed 60W for optimal performance
Frequently Asked Questions
Q: What is the main benefit of the Nexus driver + dimmer switch?
A: It simplifies installation by integrating the dimmer and driver, eliminating compatibility issues and reducing wiring complexity.
Q: Can this be installed in a standard switch box?
A: Yes, it fits into any standard recessed electrical wall box.
Q: Is it compatible with all 24V LED lights?
A: It’s designed for Nora Lighting’s 24V tape and lightbar systems, but will work with most 24V constant voltage fixtures.
Q: Does it support low dimming levels?
A: Yes, it dims smoothly from 100% down to 5% with no flicker.
Q: What protections are built in?
A: It includes short circuit, overvoltage, and thermal protection for safe operation.
Q: Will it remember settings after a power outage?
A: Yes, it includes power failure memory and will return to the last dimming level after power is restored.
Q: Can I gang multiple units together?
A: Yes, no derating is required when ganging; however, performance is best at 80% of maximum load per unit.
