Product Description
LU160B Luminator 20W FA 3000K/5000K 120V 0-10V Dim Black by RAB Lighting is a dual-head LED security flood with a built-in PIR sensor, field-adjustable color temperature, and wet-location rating—engineered for reliable perimeter and entryway illumination.
Model: LU160B
Brand: RAB Lighting
Output: 2,023–2,096 lm (spec), up to ~2,200 lm total (settings dependent)
Power: 20W | 120V
CCT: Field-adjustable 3000K–5000K
Dimming: 0–10V
Rating: UL Listed for wet locations | IP65
Free shipping on orders over $250
Sensor: PIR, 160° coverage, up to 50 ft range; time 5 s–10 min; dusk-to-dawn (LUX) control
L70 Life: 100,000 hours
Compliance: DLC 5.1 listed (Code: S-8WLTMS); TAA compliant
Finish: Black
Weight: 1.6 lb
Benefits
- Wide-area coverage with dual adjustable heads and a 160° sensor captures motion up to 50 ft for enhanced security at entries, garages, and walkways.
- Field-adjustable color (3000K–5000K) lets you match warm residential or crisp commercial scenes without swapping fixtures.
- Energy-smart performance at only 20W with high efficacy and long 100,000-hour life to minimize maintenance.
- All-weather reliability with UL wet rating and IP65 construction for eave or wall mounting outdoors.
Key Features
- Integrated PIR motion sensor with stepless time, lux, brightness, and sensitivity controls.
- 0–10V dimming plus manual-override mode for continuous on when needed.
- DLC 5.1 qualified (rebate-eligible) and TAA compliant.
- Polycarbonate housing, lens, and reflector for durability in harsh conditions.
Specifications
| Technical Specs | Details |
|---|---|
| Wattage | 20W (input ~19.3–19.4W) |
| Voltage | 120V, 60 Hz; Constant-current driver |
| Power Factor / THD | PF 98.2% / THD 11.36% (at 120V) |
| Dimming | 0–10V |
| Surge Protection | 1 kV |
| Performance | Details |
|---|---|
| Lumen Output | Spec: 2,023–2,096 lm; Sensor page notes “Total Lumen: ~2,200 lm”. |
| Efficacy | 104–109 lm/W (range) |
| CCT | 3000K–5000K field-adjustable |
| CRI | ~81–83 |
| L70 Lifetime | 100,000 hours |
| Physical | Details |
|---|---|
| Housing / Optics | Polycarbonate housing, lens & reflector |
| Finish / Color | Black |
| Weight | 1.6 lb |
| Mounting | Wall or eave; max mounting height 10 ft |
| Operating Temp | -4°F to 122°F (-20°C to 50°C) |
| Sensor & Controls | Details |
|---|---|
| Detection | 160° up to 50 ft (radius when wall mounted) |
| Hold Time | 5 s to 10 min |
| Ambient (LUX) | Dusk-to-dawn control: 5–2000 lux |
| Sensitivity | Adjustable 30–100% |
| Manual Override | Switch OFF–ON–OFF–ON within 3 sec to force ON; repeat to return to Auto |
| Compliance & Safety | Details |
|---|---|
| Listings | UL Listed for wet locations; IP65 |
| Programs | DLC 5.1 (Code: S-8WLTMS) |
| Trade | TAA compliant; BAA build possible upon request |
| Warranty | 5-year limited |
Applications
- Residential and commercial entry doors, porches, and garage areas
- Perimeter security and walkways around buildings
- Eave or wall mounting for backyards, loading side doors, and service corridors
- Small lots and parking approach areas requiring motion-activated lighting
Installation Tips
- Mount between 3–10 ft high; sensor is less sensitive above 10 ft.
- Aim so motion moves across the detection zone (not directly at the sensor) to improve pickup.
- Wire to a 120V switched circuit only; do not place on a wall dimmer, timer, or other electronic switch unless specified.
- Use included mounting plate & gasket; observe “This Side Up” orientation for wall vs. eave installs; finish with a bead of silicone around the canopy.
- Set TIME, LUX, SENS, and DIMMER to suit the site; default is ~1 min on-time, 4000K, night-only, ~25 ft sensitivity.
FAQ
Q: What voltage does LU160B require?
A: It operates on 120V, 60 Hz with a constant-current driver.
Q: How far can the motion sensor detect?
A: Up to 50 ft with a 160° field when wall mounted; best results when motion crosses the sensor field.
Q: Can I adjust how long the light stays on?
A: Yes—hold time is adjustable from 5 seconds to 10 minutes.
Q: Does it have dusk-to-dawn control?
A: Yes—set the LUX knob from night-only to operate at higher ambient light levels.
Q: How do I force the light to stay on?
A: Toggle the wall switch OFF–ON–OFF–ON within 3 seconds to enter Manual Override; repeat to return to Auto.
Q: Is the color temperature selectable?
A: Yes—use the COLOR dial to choose 3000K or 5000K (range 3000K–5000K).
Q: Is the fixture dimmable?
A: It supports 0–10V dimming and a stepless brightness setting on the sensor.
Q: What environmental ratings apply?
A: UL Listed for wet locations, IP65, and DLC 5.1 listed; 5-year limited warranty.
Q: Any installation cautions?
A: Do not install near HVAC exhausts or on electronic dimmers/timers; wire directly to a switch and seal the canopy with silicone.
Q: What’s the expected lifespan?
A: Rated L70 of 100,000 hours under LM-80/TM-21 calculations.
Spec check: primary datasheet lists 2,023–2,096 lm and also notes “Total Lumen 2200 lm” in sensor settings; values vary by settings. If rebates require a single value, use DLC listing data.
