Product Description
GTJ-5ANSM-WH Grafik T RF Switch, 5A Incandescent/Halogen/Fluorescent/LED/MLV/ELV is a Lutron GRAFIK T wallbox switch with Clear Connect RF technology, designed to deliver simple touch on/off control with a distinctive architectural aesthetic. Softly lit white LEDs provide clear status indication while coordinating with virtually any décor.
Quick Summary
- Brand: Lutron
- Control Type: GRAFIK T wallbox switch
- Wireless: Clear Connect RF (GTJ model)
- Rating: 5 A lighting
- Additional Ratings: 3 A fan, 1/10 HP motor
- Voltage: 120 V~ 50/60 Hz
- Neutral: Neutral connection required
- Color: WH (White)
Free shipping on orders over $250
Product Benefits
- RF-ready for smarter control: Clear Connect RF enables compatibility with Pico wireless controls and Radio Powr Savr occupancy/vacancy and daylight sensors for flexible control expansion.
- Architectural finish for premium spaces: Distinctive GRAFIK T styling with softly lit white LEDs delivers a clean, modern look on the wall.
- Built for multi-location switching: Supports multi-location applications using companion devices (up to 4 companion devices per switch; 1 main control per circuit).
- Versatile load support: Designed for a wide range of lighting and control loads, including incandescent/halogen, fluorescent, LED, MLV, and ELV.
Key Features
- Simple touch control for On/Off operation (touch anywhere to toggle load On/Off).
- Clear Connect RF technology (GTJ models) compatible with Pico wireless controls and Radio Powr Savr sensors.
- Softly lit white LEDs indicate status and coordinate with décor.
- Multi-location capability using conventional 3-way and 4-way wiring with companion devices.
- FASS (Front Accessible Service Switch) on main controlling devices for safe lamp replacement power disconnect.
- Uses Lutron GRAFIK T wallplates that snap on with no visible means of attachment.
Specifications
Technical
| Model | GTJ-5ANSM-WH |
| Control Type | Wallbox switch |
| Wireless Technology | Clear Connect RF (GTJ) |
| Power | 120 V~ 50/60 Hz |
| Neutral Connection | Required |
| Typical Power Consumption | 0.2 W (load off) |
Load Ratings
| Lighting Loads | 5 A (600 W) not ganged; 4.1 A (500 W) end of gang; 3.3 A (400 W) middle of gang |
| Fan | 3 A (360 W) |
| Motor | 1/10 HP |
| Supported Load Types | Incandescent/Halogen/Fluorescent/LED/MLV/ELV/HID/Relay |
| Minimum Load | 5 W, 1 Lutron compatible LED replacement lamp, or 1 Hi-lume 1% 2-wire LED driver |
| Important Limitation | Not for use with receptacles or appliances (e.g., garbage disposals) |
Performance, Mounting, and Environmental
| Power Failure Memory | Returns to previous state when power is restored |
| RF Range (GTJ Models) | Must be within 30 ft (9 m) of Pico wireless controls or Radio Powr Savr sensors |
| Multi-Location Wiring | Uses conventional 3-way and 4-way wiring; total blue traveler wire length up to 150 ft (45 m) |
| Wallbox Requirement | U.S. wallbox; 3.5 in (89 mm) deep recommended, 2.25 in (57 mm) deep minimum |
| Operating Temperature | 32 °F to 104 °F (0 °C to 40 °C) |
| Relative Humidity | 0% to 90% non-condensing |
| Use Location | Indoor use only |
Compliance and Safety
| Regulatory Approvals | UL Listed, cUL Listed, NOM Certified, FCC/IC, IFTEL |
| Warranty | 1 Year Limited Warranty |
Applications
- Residential lighting and fan control: Ideal for bedrooms, living areas, kitchens, and multi-zone spaces needing a premium wall aesthetic.
- Commercial interiors: Offices, conference rooms, hospitality spaces, and retail where architectural controls and reliable switching are required.
- RF-enabled control expansions: Add Pico wireless controls and Radio Powr Savr sensors to enhance convenience and automation (GTJ models).
- Multi-location switching: Hallways, large rooms, or entries requiring control from multiple locations using companion devices.
Installation Tips
- Neutral required: Plan for a neutral connection in the wallbox for GTJ-5ANSM-WH installations.
- Use proper wallbox depth: 3.5 in (89 mm) deep is recommended; 2.25 in (57 mm) minimum.
- Multi-location setup: Use companion devices for additional locations (up to 4). Keep total blue traveler wire length within 150 ft (45 m).
- RF placement: For GTJ models, locate within 30 ft (9 m) of Pico wireless controls or Radio Powr Savr sensors for reliable communication.
- Service safety: Use FASS on main controlling devices to remove power before replacing lamp(s), then restore power after replacement.
- Wallplate finish: Use Lutron GRAFIK T wallplates that snap on with no visible means of attachment for a clean final install.
FAQ
What is the GTJ-5ANSM-WH?
It is a Lutron GRAFIK T wallbox switch with Clear Connect RF technology, rated for 5 A lighting loads and designed for architectural installations.
Does this switch require a neutral wire?
Yes. The GTJ-5ANSM-WH requires a neutral connection.
What load types can it control?
It is rated for incandescent/halogen, fluorescent, LED, MLV, ELV, HID, and relay loads, with additional ratings of 3 A for fan and 1/10 HP motor.
Can it be used in multi-location switching?
Yes. It supports single-pole and multi-location applications using conventional 3-way and 4-way wiring, with up to 4 companion devices per switch and 1 main control per circuit.
What is the RF range for Pico controls and sensors?
For GTJ models, the switch must be located within 30 ft (9 m) of Pico wireless controls or Radio Powr Savr sensors.
Is it allowed to control receptacles or appliances?
No. It is not for use with receptacles or appliances such as garbage disposals.
What is the minimum load requirement?
The minimum load for the switch is 5 W, 1 Lutron compatible LED replacement lamp, or 1 Hi-lume 1% 2-wire LED driver.
Where can this switch be installed?
It is rated for indoor use only with an ambient operating range of 32 °F to 104 °F (0 °C to 40 °C) and 0% to 90% non-condensing relative humidity.
