EZP2X4 EZPAN 50/40/30W 3500/4000/5000K 0-10V Dim

Product Description

EZP2X4 EZPAN 50/40/30W 3500/4000/5000K 0-10V Dim by RAB Lighting is a field-adjustable, edge-lit LED panel designed for clean, uniform illumination in commercial recessed grid ceilings. With selectable wattage and CCT, smooth 0-10V dimming, and high-efficacy performance, it’s an easy upgrade for offices, schools, healthcare corridors, retail, and other everyday task-lighting spaces.

Product Benefits

• One panel, multiple setups: Field-select wattage and color temperature to match the space, reduce SKUs, and simplify stocking.
• Comfortable, uniform light: Edge-lit diffuser helps minimize glare and eliminates visible diodes, hot spots, and shadows for a cleaner ceiling appearance.
• Controls-ready performance: Built-in 0-10V dimming wiring supports modern lighting control strategies and energy goals.
• Built for everyday commercial use: Damp-location suitability, IC rating, and robust construction make it a dependable panel for common interior environments.

Key Features

• Field adjustable output: 50W / 40W / 30W selection (factory default: 50W)
• Selectable CCT: 3500K, 4000K, 5000K (factory default: 4000K)
• 0-10V dimming: Requires a separate 0-10V DC dimming circuit; dims down to 10%; Dim-to-Off: Yes
• Universal input: 120–277V operation
• High efficacy LEDs: Long-life, high-efficacy surface-mount LEDs
• DLC Standard Listed: Designed to meet DLC 5.1 requirements
• Surge protection: 2 kV + 4 kV
• Cold weather start: Minimum starting temperature -22°F (-30°C)

Enhanced Specifications

Technical Specs

Voltage	120–277V, 50/60 Hz
Driver Type	Constant Current, Class II
Dimming	0-10V (dims to 10%); Dim-to-Off: Yes
Power Factor	99.3% at 120V; 96.9% at 277V
Total Harmonic Distortion (THD)	10.89% at 120V; 12.29% at 277V
Surge Protection	2 kV + 4 kV

Performance Specs

Wattage (Selectable)	50W / 40W / 30W
Input Watts	29.5–49.8W
CCT (Selectable)	3500K / 4000K / 5000K
CRI	83–85
Lumens	3,961–6,352 lm
Efficacy	120.7–140 lm/W
LED Lifespan	100,000-hour (based on LM-80 results and TM-21 calculations)

Physical Specs

Panel Size	2' x 4' class panel (EZP2X4)
Color / Finish	White; formulated for high durability and long-lasting color
Weight	12.2 lbs
Lens / Diffuser	Precision engineered polystyrene diffuser for high uniformity and reduced glare; no visible diodes/hot spots/shadows
Housing	Aluminum + Iron
Reflector	TPET reflective paper
Operating Conditions	Minimum starting temperature: -22°F (-30°C); suitable up to 104°F (40°C)

Compliance & Safety

Listings / Ratings	UL Listed; suitable for damp locations; IC rated for direct contact with insulation
Testing	Independent laboratory testing in accordance with IESNA LM-79 and LM-80
DLC	Listed; eligible for rebates from participating utilities (where applicable)
Trade Agreements Act	Trade Agreements Act Compliant; designated-country end product (Cambodia)
Environmental	Mercury and UV free; RoHS-compliant components

Application Examples

• Office lighting: Open offices, conference rooms, break areas
• Education: Classrooms, corridors, libraries
• Healthcare: Hallways, nurses’ stations, administrative areas
• Retail: General ambient lighting for aisles and back-of-house
• Municipal / commercial: Lobbies, common areas, meeting rooms
• Grid ceilings: 9/16" or 15/16" flat tee applications (above-ceiling access required)

Installation Tips

• Turn power OFF first: Verify power is off before installing or servicing the fixture.
• Indoor recessed ceiling only: Designed for recessed ceiling mounting; above-ceiling access is required for wiring access.
• Grid clip setup: Firmly bend the pre-installed grid clips up and out, then rotate/slide the fixture through the tee-grid bar and secure it.
• Independent support: Some jurisdictions require support wires; fixture may need to be independently supported to the building structure (support wires by others).
• Plan access: Orient the splice box and access plate toward an accessible ceiling tile for electrical splices.
• 0-10V dimming wiring: Connect black to LINE, white to COMMON/NEUTRAL, green to GROUND, purple to DIM (+), pink to DIM (-). Do not connect DIM leads to line voltage or supply ground.
• Field-adjust settings: Set wattage and CCT using the driver-side switches, then install the silicone covers to lock the settings in place.
• Cleaning: Clean lens and fixture with a non-abrasive solution; do not open the fixture to clean LEDs or touch LEDs directly.

FAQ

How do I change wattage and color temperature on the EZP2X4?
Locate the field-adjustment switches on the driver side of the fixture, slide the switches to the desired wattage (50W/40W/30W) and CCT (3500K/4000K/5000K), then insert the silicone covers to lock the settings in place.

What are the factory default settings?
Factory default is 50W and 4000K for the EZP2X4 configuration.

Is this panel compatible with 0-10V dimming controls?
Yes. The driver includes dimming control wiring for 0-10V dimming systems. A separate 0-10V DC dimming circuit is required, and the fixture dims down to 10% (and supports dim-to-off).

Can I use this in damp locations?
Yes. The EZP2X4 is UL Listed and suitable for damp locations.

Is the EZP2X4 IC rated for insulated ceilings?
Yes. It is IC rated and suitable for direct contact with insulation. Follow all installation code requirements, including ceiling grid and support requirements.

What ceiling grids does it fit?
It is suitable for 9/16" or 15/16" flat tee grid ceilings (insulated or non-insulated). Above-ceiling access is required.

What is the expected lifespan?
The panel is designed for a 100,000-hour LED lifespan based on LM-80 results and TM-21 calculations.

Is this product eligible for DLC rebates?
The EZP2X4 is DLC Listed and may be eligible for rebates from participating utilities where DLC rebates are offered (check local program requirements).

What mounting types are supported?
The fixture supports surface, suspended, and recessed mounting, with mounting accessories sold separately. For recessed installs, standard integral T-bar clips help secure the fixture to T-bars.